![background image](http://html.mh-extra.com/html/toshiba/ts3100/ts3100_instruction-manual_425071103.webp)
TRANSPORTATION AND INSTALLATION MANUAL
103
b) Square connectors: ENC, HAND, SYSTEM, INPUT, OUTPUT, TRIG, CONF.
Firstly, completely insert the cable side connector into the controller connector.
Then tighten the lock screws on both ends of the cable side connector with a
screwdriver. A loose screw can cause a contact failure or other accident. To
avoid this, make sure that the screws are clamped completely
To disconnect the connectors, first loosen the lock screws, then pull out the cable
side connector. INPUT and OUTPUT are quick-operated lock type connectors,
however.
Fig. 9.5 Connecting and disconnecting a square connector (TS3100)
Connector on the
controller body side
Connector on the
cable side
Loosen
Tighten
Connector