TRANSPORTATION AND INSTALLATION MANUAL
112
Dimensions When the Control Panel Is Detached
9.3.5.
The connection diagram of the control panel and the dummy panel is shown in Fig. 9.9.
Allocate a clearance of 50 mm or more (60 mm or more when the cover is used) in the
back of the detached control panel. When the connection cable is attached to the
dummy panel of the controller, a clearance of about 80 mm is required as the cable
connector is protruded to the front of the controller.
.
Fig. 9.9 Connection diagram of the dummy panel and the control panel (TS3100)
80 mm or more from the
dummy panel
Without cover: 50 mm or more
With cover: 60 mm or more