TRANSPORTATION AND INSTALLATION MANUAL
26
Fig. 2.6 Robot handling areas
After the installation, remove the clamp and lifting jig used for transport.
!
CAUTION
• When lifting up the robot by workers, hold the locations (arrowed parts) by
hands as shown in Fig. 2.6. If the arm 2 and arm 3 are held by hands, an
unusually large force is exerted, resulting in a malfunction.
• Do not hold the cable duct by hand. If you hold it, the harness cable may be
broken or the connections may be faulty.
• When carrying the robot by workers, take careful precautions to prevent their
hand or leg from being caught in the robot.
• The handling position may contain irregularities such as a notch in some very
rare cases. Take care not to be injured by them.
• The work should be performed by two or more workers.
Handling areas
Handling areas
DO NOT hold the arms 2 and 3.
