manualshive.com logo in svg

Toshiba T1960CS, Maintenance Manual

Share
Download
Toshiba T1960CS Maintenance Manual Download Page 90

T1960CS/T1960CT

3-47

3.21 Floppy Disk Drive Utilities

3.21.1

Function Description

This function formats the FDD, copies the floppy disk, and displays the dump list for both the
FDD and the HDD.

1.

FORMAT

NOTE

:  This program is only for testing a floppy disk drive.  The

option is different from the Toshiba MS-DOS FORMAT command.

This program can format a 5.25-inch or 3.5-inch floppy disk in the following
formats:

(a)

2D:  Double-sided, double-density, 48/67.5 TPI, MFM mode, 512 bytes,
9 sectors/track.

(b) 2DD:  Double-sided, double-density, double-track, 96/135 TPI, MFM

mode, 512 bytes, 9 sectors/track.

(c)

2HD:  Double-sided, high-density, double-track, 96/135 TPI, MFM
mode, 512 bytes, 18 sectors/track.

2.

COPY

This program copies data from a source floppy disk to a target floppy disk.

3.

DUMP

This program displays the contents of the floppy disk (both 3.5-inch and 5.25-
inch) and the designated sectors of the hard disk on the display.

3.21.2

Operations

1.

Select 

7

 (FDD Utilities) from the DIAGNOSTICS MENU and press 

Enter

.

The following message displays:

[ FDD UTILITIES ]

1

- FORMAT

2

- COPY

3

- DUMP

9

- EXIT TO DIAGNOSTICS MENU

Summary of Contents for T1960CS























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands