manualshive.com logo in svg

Toshiba T1960CS, Maintenance Manual

Share
Download
Toshiba T1960CS Maintenance Manual Download Page 100

T1960CS/T1960CT

3-57

(c)

External FDD/PRT

Assigns the function of the printer/FDD port.

Printer

Configures the port for output to a printer or other
parallel device.  (Default)

FDD A

Configures the port for output and input to and from
the external 5 1/4" diskette drive and assigns the
letter A to the external drive.  By default the internal
drive becomes Drive B.

FDD B

Configures the port for output and input to and from
the external 5 1/4" diskette drive and assigns the
letter B to the external drive.  By default the internal
drive remains Drive A.

The following table is a quick reference to the "External FDD/PRT" setting.

Option Setting

External FDD ID

Internal FDD ID

Printer (default)

None

A

FDD A

A

B

FDD B

B

A

(d)

Printer Port Type

Sets the communication mode for the printer/FDD port to either output-only
or bi-directional.  It is effective only when the "External FDD/PRT" option is
set to 

Printer

.  If 

FDD A or B

 is selected, this setting is ignored and the

mode is automatically set to bi-directional.  For most printers, the port
should be set to 

Output

.  With some other parallel devices, the setting should

be 

Bi-directional

.

Output

Activates uni-directional operation.  (Default)

Bi-directional

Activates bi-directional operation.

4.

Hark Disk

This option enables or disables the hard disk drive.

200 or 320 MB

You can access the hard disk.  The disk’s
capacity is automatically displayed and cannot be
changed.

No Drive

You cannot access the hard disk.

Summary of Contents for T1960CS























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands