manualshive.com logo in svg

Toshiba T1960CS, Maintenance Manual

Share
Download
Toshiba T1960CS Maintenance Manual Download Page 103

3-60

T1960CS/T1960CT

(f)

Speaker

Enables or disables software use of the system speaker.  Setting this option
to 

Disabled

 disables the self-test alarm.  All other system alarms are unaf-

fected.  This option also appears in the Pop-up Window.

Enabled

Enables software use of the system speaker.
(Default)

Disabled

Disables software use of the system speaker.

(g)

Battery Alarm

Enables or disables the low battery alarm.  This option also appears in the
Pop-up Window.

Enabled

Enables the alarm.  (Default)

Disabled

Disables the alarm.

(h)

Panel Power On/Off

Allows you to automatically turn your computer on or off by opening or
closing the display panel.  If this feature is enabled, when the computer is in
Resume mode, the system automatically powers off when the display panel is
closed and powers on when the panel is opened.  This option does not
appear when the computer is in boot mode.

Enabled

Enables the feature.

Disabled

Disables the feature.  (Default)

(i)

Boot Priority

Selects the disk drive priority for boot up.

FDD 

→

 HDD

The computer looks for bootable files first on the
FDD and next on the HDD.  (Default)

HDD 

→

 FDD

The computer looks for bootable files first on the
HDD and next on the FDD.

You can reverse the order by holding down the 

F10

 key while the computer

is booting.  This procedure does not affect the setting.

Summary of Contents for T1960CS























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands