4-26
T1960CS/T1960CT
6.
Secure the
lower metal plate
with
two M2.5x8 screws
(Figure 4-20).
7.
Turn the assembly over, and place the lower system board assembly into the
computer's chassis, inserting the
DC IN jack
into the opening on the left side of
the chassis (Figure 4-19).
CAUTION
: When you install the lower system board assembly, be careful to
thread the FDD cable through the FDD cable hole.
8.
Secure the
two M2.5x10 screws
by the power supply circuits, and connect the
FDD cable
to
PJ202
(Figures 4-18 and 4-19).
9.
Secure the
M2.5x6 screw
on the bottom of the unit (Figure 4-19).
10.
Set the
RTC battery
in the RTC battery holder on the middle frame assembly
(Figure 4-18).
11.
Set the PCMCIA expansion slot cover in place and secure it with two M2.5x6
screws.
12.
Install the upper system board, display assembly, display mask, HDD, keyboard,
top cover, optional PCMCIA card, optional memory card and battery pack as
described in Sections 4.9, 4.8, 4.12, and 4.7 through 4.2.
Summary of Contents for T1960CS
