Toshiba T1960CS Maintenance Manual Download Page 88

Page: 88 / 182

T1960CS/T1960CT

3-45

3.20 Running Test

3.20.1

Function Description

This function automatically executes the following tests in sequence:

System Test (Subtest 01)

Memory Test (Subtests 01, 02, 04, and 06)

Display Test (Subtests 01 to 08)

FDD Test (Subtest 02)

HDD Test (Subtests 01 and 05)

Real Timer Test (Subtest 02)

Printer Test (Subtest 03)

Async Test (Subtest 01)

The system automatically detects the number of floppy disk drives connected to the T1960CS/
T1960CT for the FDD test.

3.20.2

Operations

CAUTION

: Do not forget to load a work disk in the FDD. If a work disk is not

loaded, an error will be generated during the FDD testing.

Remove the diagnostics disk from the floppy disk drive and insert the work
disk.

Select

(Running Test) from the DIAGNOSTICS MENU and press

Enter

the following message will be displayed:

Printer wraparound test (Y/N) ?

Selecting

Y (Yes)

executes the printer wraparound test. A printer wrap-

around connector must be connected to the

PRT/FDD

port on the back of

the T1960CS/T1960CT to properly execute this test.

Select

and press

Enter

. The following message will appear:

Serial #A wrap around test (Y/N) ?

Selecting

Y (Yes)

executes the ASYNC wraparound test. An RS-232-C

wraparound connector must be connected to the

serial port

on the back of

the T1960CS/T1960CT to properly execute this test.

Summary of Contents for T1960CS























































































































































































Search results

Summary of Contents for T1960CS

Reviews:

Brands by name

Popular brands

Toshiba T1960CS, Maintenance Manual

Search results

Summary of Contents for T1960CS

Reviews:

Brands by name

Popular brands