4-32
T1960CS/T1960CT
Installing the T1960CS FL Inverter Board
To install the T1960CS’s FL inverter board, follow the steps below and refer to Figures 4-26
and 4-27.
1.
Connect the
FL inverter cable
to
CN1
on the
inverter board
and the
two FL
cables
to
CN2
and
CN3
(Figure 4-27).
2.
Route the
cables
so they are not pinched by the
FL inverter board
,
display
hinge
or other component.
3.
Replace the
FL inverter board
and secure it with the
two M2.5x6 screw
s (Figure
4-27).
4.
Set the
display support plate
in place and secure it with
four M2.5x6 screws
.
One screw also secures the
display ground cable
(Figure 4-26).
5.
Install the display mask, top cover, optional PCMCIA card, optional memory card
and battery pack as described in Sections 4.12, 4.5, 4.4, 4.3 and 4.2.
Summary of Contents for T1960CS
