Toshiba Strata CT 2000 Series User Manual Download Page 91

Page: 91 / 196

Strata CT Digital Telephone User Guide November 2001

Features

Two (Tandem) Exchange Line Connection

Two (Tandem) Exchange Line Connection

[DN] Button

This feature enables a station user to connect two Exchange lines, then drop out of the conversation.

➤

To connect two outside lines (using a [DN] button)

1. While talking on an outside

call using a [DN] button,
press

Cnf/Trn

You hear dial tone. The [DN] LED
flashes (conference rate).

2. Dial an Exchange line access

code and then the outside
telephone number.

See

Table 14 on Page 156

ask your System
Administrator.

3. After the party answers,

press

Cnf/Trn

The [DN] LED flashes (in-use rate) and all parties are
conferenced.

If you receive a busy tone/no answer, press [DN] to return
to the original connection.

4. Press

Cnf/Trn

and hang-up.

You hear dial tone before you
hang-up The [DN] LED flashes
(exclusive-hold rate) and the two
lines are connected.

and

identify the connected Exchange
lines.

The LED turns OFF when the parties hang-up.

If the public telephone company provides auto disconnect,
the connection may release automatically when the parties
hang up. If not, the lines must be supervised to be
disconnected (see

“Supervision” on Page 77

TRK-TRK N1 N2
JAN 10 THU 11: 57

Summary of Contents for Strata CT 2000 Series





































































































































































































Search results

Summary of Contents for Strata CT 2000 Series

Reviews:

Related manuals for Strata CT 2000 Series

Brands by name

Popular brands

Toshiba Strata CT 2000 Series, User Manual

Search results

Summary of Contents for Strata CT 2000 Series

Reviews:

Related manuals for Strata CT 2000 Series

Brands by name

Popular brands