Strata CT Digital Telephone User Guide November 2001
33
Features
Call Forward
Remote Destination Change
If Call Forward-External mode is set at your station, you can change the forwarding destination from
a telephone outside of the system.
➤
To change the destination number
1. Call into the CT system over
an Exchange line
programmed for the DISA
feature.
You hear ringback tone signal, then internal dial tone for 10
seconds.
Try again if you hear busy tone.
Note
See the System Administrator for DISA telephone
numbers.
2. After you receive dial tone,
press
#670
then dial your
[PDN].
You hear a confirmation tone.
If a number is not dialled, the system automatically makes the
DISA Exchange line ring as a normal incoming call. Then, if
the call is not answered within 15 seconds after the ringing
starts, it disconnects.
3. Enter the Remote Call
Forward-External security
code.
You hear a confirmation tone. See the System Administrator for
the security code which is assigned to your telephone in system
programming.
4. Enter the new destination
number. You can enter an
internal number, Voice Mail
number or, an Exchange line
access code plus an external
telephone number. With
some systems, you can dial a
line group code instead of an
Exchange line number
access code. (
Table 14 on
Page 156
for access code
information.)
5. Press
#
.
You hear a confirmation tone.
Summary of Contents for Strata CT 2000 Series
