Toshiba Strata CT 2000 Series User Manual Download Page 93

Page: 93 / 196

Strata CT Digital Telephone User Guide November 2001

Features

Two (Tandem) Exchange Line Connection

Supervision

➤

To supervise a tandem call and release it

5. Press

Cnf/Trn

and hang

up.

You hear dial tone. Both Line
LEDs continue to flash
(exclusive-hold rate) and the two
lines are connected.

and

identify the connected Exchange
lines.

The LED turns OFF when the parties hang-up.

If the public telephone company provides auto disconnect,
the connection may release automatically when the parties
hang up. If not, the lines must be supervised to be
disconnected (see

“Supervision” on Page 77

1. Press [DN]

...or

Line

...or

Pooled Line Grp

You are connected to both
Exchange lines. Both Line
LEDs flash (in-use rate).

and

identify the connected

Exchange lines.

2. If the parties have hung up,

go back on-hook

...or if the parties are still
talking, press

Cnf/Trn

and

hang-up.

Both Line LEDs turn OFF and the connection is
released.

TRK-TRK N1 N2
JAN 10 THU 11: 57

Summary of Contents for Strata CT 2000 Series





































































































































































































Search results

Summary of Contents for Strata CT 2000 Series

Reviews:

Related manuals for Strata CT 2000 Series

Brands by name

Popular brands

Toshiba Strata CT 2000 Series, User Manual

Search results

Summary of Contents for Strata CT 2000 Series

Reviews:

Related manuals for Strata CT 2000 Series

Brands by name

Popular brands