144
Q9 ASD Installation and Operation Manual
FM Output Gradient Characteristic
Program
AM/FM
This parameter sets the output response polarity of the FM output terminal. The
FM output terminal response may be set to respond inversely (-) or directly (+) to
the input signal.
for more information on this setting.
Settings:
0 — Minus (Negative Gradient)
1 — Plus (Positive Gradient)
Direct Access Number — F682
Parameter Type — Selection List
Factory Default — Plus (Positive
Gradient)
Changeable During Run — Yes
FM Bias Adjustment
Program
AM/FM
This parameter setting is used to ensure that a zero-level input signal produces a
zero-level output at the FM terminal.
to zero and then set this parameter to zero for
proper operation.
for more information on this setting.
Direct Access Number — F683
Parameter Type — Numerical
Factory Default — 0.0
Changeable During Run — Yes
Minimum — -10.0
Maximum — +100.0
Units — %
FM Output Filtering
No Path — Direct Access Only
Analog filtering is applied after the analog reference signal is converted to a
digital signal. The type of filtering used is Rolling Average over time.
Select the sampling rate from the list below.
Settings:
0 — None (1 ms)
1 — Small (8 ms)
2 — Medium (16 ms)
3 — Large (32 ms)
4 — Huge (64 ms)
An increased value here may eliminate false responses to electrical noise with no
loss in bandwidth because the value used by the ASD is the average value of a
number of samples.
for more information on this setting.
Direct Access Number — F684
Parameter Type — Selection List
Factory Default — None (1 ms)
Changeable During Run — Yes
AM Output Gradient Characteristic
Program
AM/FM
This parameter sets the output response polarity of the AM output terminal.
The AM output terminal response may be set to respond inversely (-) or directly
(+) to the input signal.
for more information on this setting.
Settings:
0 — Minus (Negative Gradient)
1 — Plus (Positive Gradient)
Direct Access Number — F685
Parameter Type — Selection List
Factory Default — Plus (Positive
Gradient)
Changeable During Run — Yes
Summary of Contents for Q9 Series
Page 2: ......
Page 4: ......
Page 8: ......
Page 219: ...Q9 ASD Installation and Operation Manual 209 Figure 30 See Table 14 for Actual Dimensions ...