background image

IP

edge

IPedge Enterprise Manager

IPedge UG    01/13

TOSHIBA

311

Call Forward

This screen has two parts:

CF Internal Calls and Line Calls

CF Direct Line Calls

CF Internal and

Line Calls

This Call Forward option allows you to forward internal calls and outside line calls 
that come to your extension to another destination. The destination can be voice 
mail, another telephone extension connected to your telephone system or private 
network; or, an external telephone number connected through the public 
telephone network. 

Definitions

1. Line calls are calls that come to your extension through the public telephone 

network lines. If your telephone has a direct line and the “CF Direct Line Calls” 
option is activated, direct line calls to your extension will forward to the “CF 
Direct Line Calls” destination – not to the destination set in this option.

2. Internal calls are calls that come to your telephone from the Attendant 

Console, other telephones and voice mail devices connected to your 
telephone system or telephone system private network.

3. Your telephone may call forward even if you do not activate it; this is because 

your system administrator has activated System Call Forward on your 
telephone.

CF Direct Line

Calls

This Call Forward option allows you to forward direct line calls to another 
destination. When you activate this CF option, only line calls to your direct line 
telephone number will forward calls to the destination set in this option. Internal 
calls will not forward to the destination set in this option. The destination can be 
voice mail, another telephone extension connected to your telephone system or 
private network; or, an external telephone number connected through the public 
telephone network. 

Definitions

1. Direct Line calls are calls that ring your extension when outside callers dial 

your direct line telephone number. They do not include internal calls from 
telephones that dial your extension number or outside line calls that ring 
multiple telephones on your telephone system.

2. When this option is activated, direct line calls forward to this destination and 

ignore the destination set in the “CF Internal and Line Calls” option. 

3. Internal calls are calls that come to your telephone from the Attendant 

Console, other telephones and voice mail devices connected to your 
telephone system or telephone system Private Network.

4. Your telephone may call forward even if you do not activate it; this is because 

your system administrator has activated System Call Forward on your 
telephone.

This feature enables you to assign Call Forward (CF) destinations for each 
extension on your telephone that will override the telephone’s System CF settings.

To set up Station

Call Forward

1. Select Call Forward tab.The Call Forward screen displays.

2. Enter the appropriate fields.

Note:

Hover over the bubbles located above the parameters to read the flyover 
text for information to be entered in each field.

3. Click the Save button.

Summary of Contents for IPedge



































































































































































































































































































































Reviews: