
e-STUDIO167/207/237
© February 2007 TOSHIBA TEC CORPORATION All rights reserved
GENERAL OPERATION
4 - 8
(C) Misfeed in equipment
•
Exit sensor detects jamming of the leading edge of paper.
#
Registration clutch ON
Fig. 4-1
#
Less than 1.808 sec.
Exit sensor ON
If the exit sensor is not turned ON after 1.808
sec.
#
Paper jam (E01)
!%
The copying operation is
stopped.
•
Exit sensor detects jamming of the tailing edge of paper.
#
Registration clutch OFF
Fig. 4-2
#
Less than 1.759 sec.
Exit sensor OFF
If the exit sensor is not turned OFF after 1.759
sec.
#
Paper jam (E02)
!%
The copying operation is
stopped.
•
Immediately after the power ON
#
Any of all sensors on paper transport path detects paper (ON)
#
Paper jam (E03)
•
Front cover is opened during copying
#
Paper jam (E41)
•
The registration sensor (S4) is not turned ON in a fixed period of time when paper is fed out of the
ADU.
#
Paper jam (E11)
Registration clutch
Exit sensor
Timer
0
Paper jam (E01)
ON
ON
1.808sec.
Registration clutch
Exit sensor
Timer
0
Paper jam (E02)
ON
OFF
1.759sec.