Removing the Reel Drive Belt (continued)
4. Remove and inspect the reel drive gasket (5) from the reel drive housing (1).
Replace the reel drive gasket (5) if it is worn or damaged.
5. Loosen the nut securing carriage bolt (4) and the idler arm (3), and rotate the
arm to remove tension from the belt (2).
6. Remove the belt (2) from the pulleys.
Installing the Reel Drive Belt
1. Ensure that the nut and carriage bolt (4) are loose enough to freely move
the idler arm (3).
2. Place the new drive belt (2) over the pulleys.
3. Adjust the reel belt tension; refer to
Adjusting the Reel Drive Belt (page 4–3)
.
4. Align the reel drive gasket (5) to the reel drive housing (1), and install the reel
drive cover (6) to the housing with the 4 socket head screws (7).
5. Initially torque the socket head screws to
1.7 to 4.5 N∙m (15 to 40 in-lb)
.
Then using an alternating pattern torque the socket head screws to
9.6 to
10.7 N∙m (85 to 95 in-lb)
.
6. Connect the battery pack; refer to
Disconnecting and Connecting the Lithium
Battery Pack (page 5–3)
.
Traction and Reel Drive Systems: Service and Repairs
Page 4–6
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
