Toro 04861, Service Manual

Page: 99 / 234

Main Menu Screen (continued)
•
Settings
•
About
Press the down button (as indicated by the at the bottom of the screen) to
highlight the desired menu screen, then press the left/right button (as indicated
by the
at the bottom of the screen) to enter the highlighted menu screen.
To return to the main information screen from the main menu screen, press the
menu/back button (as indicated by the
at the bottom of the screen).
Faults Screen
5
2
3
2
1
Faults
#11
Clear System Faults -- 3 2 . 6 Ago 4
3
g339627
Figure 42
1. Left/right button 4. Fault items
2. Down button 5. Fault menu
3. Menu/back button
The faults screen ( Figure 42 ) will list all the machine electrical faults that have
occurred since the faults were last cleared from the InfoCenter. The faults will be
identified by a number and when the fault occurred. The faults that might occur
on the eFlex machine are listed in the
Machine Faults (page 3–5) .
The InfoCenter fault log can be cleared by selecting the clear system faults
menu item. The cleared faults will be removed from the InfoCenter but will be
retained in the TEC memory.
If a fault occurs during machine use, there may be a change in machine
functionality due to the fault. Should there be machine operation issues due
to a fault, a first step to remedy the issue would be to move the traction bail
to the N
EUTRAL
position, turn the key switch to the O
FF
position, and allow all
the machine functions to stop. Then, attempt to restart the machine to see if
operation has returned to normal. Some faults will be reset during the restart
and will then allow normal function. If a fault continues to occur, further system
evaluation and possible component repair or replacement will be necessary.
To return to the main menu screen from the faults screen, press the menu/back
button (as indicated by the
at the bottom of the screen).
Greensmaster ® eFlex 1021 Page 5–15 Electrical System: Electrical System Operation
20248SL Rev C