Brake Latch Shaft
g336961
Figure 83
1.
Shoulder bolt
5.
Roll pin
9.
Brake latch shaft
2.
Flange bushing (2 each)
6.
Bolt
10.
Torsion spring
3.
Lever
7.
Flange bushing (2 each)
11.
Flange nut
4.
Brake lock lever
8.
Flange nut
12.
Upper receiver weldment
Disassembling the Brake Latch Shaft
Note:
Refer to
during this procedure.
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
2. Disconnect the battery pack; refer to
Disconnecting and Connecting the
Lithium Battery Pack (page 5–3)
.
3. Remove the bolts and washers that secures the control covers to the upper
receiver weldment.
4. Using the drift pin, remove the roll pin (5) from the brake lock lever (4).
5. Slide and remove the brake lock lever (4) from the brake latch shaft (9).
Controls, Wheels, and Accessories : Service and Repairs
Page 6–12
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
