Toro 04861, Service Manual

Page: 73 / 234

Disassembling the Transmission Gear Box Assembly (continued)
3. Remove the oil seal (6), retaining ring (5) from the transmission cover (23).
Use a press to remove the ball bearing (25) from the transmission cover (23).
Discard the oil seals and ball bearing.
g339790
Figure 26
1. External retaining ring 10. O-ring (2 each) 19. Brake lever
2. Pipe plug 11. Retaining ring (2 each) 20. O-ring
3. Wave washer 12. Flange bearing (2 each) 21. Brake clevis pin
4. Ball bearing (2 each) 13. Ball bearing (2 each) 22. Flat wire spring
5. Neutral spur gear 14. Differential assembly 23. Transmission housing assembly
6. Neutral slider shaft 15. Retainer plate pin 24. Cable brake lever
7. Square key (2 each) 16. Brake plate retainer 25. Bolt
8. Bolt (2 each) 17. Retaining ring
9. Differential shaft (2 each) 18. Brake band
4. Remove the neutral spur gear assembly (item 5 in Figure 26 ) and wave
washer (3) from the transmission housing assembly (23).
5. Use a press to remove the ball bearings (4) from the neutral slider shaft
(6). Remove the square keys (7) from the neutral slider shaft (6). Discard
the ball bearings.
6. Remove the differential assembly (14) from the transmission housing
assembly (23).
7. Remove the 2 differential shafts (9) from the differential housing (14).
Remove the retaining rings (11) and O-rings (10) from the differential shafts
(9). Discard the O-rings.
8. Use a press to remove the 2 ball bearings (13) and 2 flange bearings (12)
from the differential assembly (14). Discard the ball bearings (13).
Greensmaster ® eFlex 1021 Page 4–25 Traction and Reel Drive Systems: Service and Repairs
20248SL Rev C