Service and Repairs
Reel Drive Belt
g312311
Figure 14
1.
Reel drive housing
4.
Carriage bolt
7.
Socket head screw (4 each)
2.
Reel drive belt
5.
Bolt Gasket
3.
Idler arm
6.
Reel drive cover
The Greensmaster machines use a positive drive belt on the right side of the
machine to operate the cutting unit.
Removing the Reel Drive Belt
Note:
Refer to
during this procedure.
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
2. Disconnect the battery pack; refer to
Disconnecting and Connecting the
Lithium Battery Pack (page 5–3)
.
3. Remove the 4 socket head screws (7) that secure the reel drive cover (6)
to the reel drive housing (1), and remove the cover to expose the reel drive
belt (2).
Greensmaster
®
eFlex 1021
Page 4–5
Traction and Reel Drive Systems: Service and Repairs
20248SL Rev C
Summary of Contents for 04861
