Machine is Inoperative and InfoCenter Power Light Indicates That a Fault Has
Occurred
Possible Causes
Correction
The controller has detected a fault.
Use the Faults screen information in the
InfoCenter section of this chapter to help
identify source of problem.
An electrical fault occurred that can be reset
by the controller.
Attempt to restart the machine to see if the
machine operation has returned to normal. If
the fault remains active, use the Faults screen
information in the InfoCenter section of this
chapter to help identify source of problem.
Machine Operates But InfoCenter Display is Not Working
Possible Causes
Correction
The wire harness connections or wires to the
InfoCenter display are loose or damaged.
Check the electrical connections. Repair the
wiring as necessary.
The InfoCenter display is damaged.
Replace the InfoCenter display.
Troubleshooting: Electrical System Problems
Page 3–10
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
