Toro 04861, Service Manual

Page: 13 / 234

– Use only Toro-specified lithium-ion battery packs designed for your
machine. Do not mix battery of any brand or type in Toro products.
– Use only the Toro-specified lithium-ion charger designed to charge your
machine. Do not attempt to use any other battery charger.
– Do not over-charge or over-discharge lithium-ion battery.
– Do not heat, puncture, or open the battery case.
– Always disconnect the battery at the battery disconnect provided when
servicing products with lithium-ion batteries.
– Always service lithium-ion battery with the machine parked near a service
door large enough to move the product or battery outside in case of an
emergency and keep a fire blanket nearby. Do not use a fire extinguisher
on lithium-ion batteries.
•
Avoid injury due to inferior parts…
Use only original equipment parts to ensure that important safety criteria
are met.
•
Avoid injury to bystanders…
Always clear the area of bystanders before starting or testing powered
equipment.
•
Avoid injury due to projectiles…
Always clear the area of any debris that could be picked up and thrown
by the powered equipment.
•
Avoid modifications…
Do not alter or modify any part unless it is a factory approved procedure.
•
Avoid unsafe machine operation…
Always test the safety interlock system after adjusting or repairing the
machine. Refer to the
Chapter 5: Electrical System (page 5–1) in this
manual for more information.
•
Avoid electrical shock…
– Never touch electrical wires or components while the engine is running.
They can be sources of shock.
– De-energize the system if you are having to do repairs.
– When testing electrical components, ensure you are working in a dry
environment.
– Do not wear metal jewelry when working on or near electrical components
or wiring.
•
Use personal protective equipment…
– Tie back long hair, and do not wear loose clothing or jewelry.
– Use appropriate personal protective equipment (PPE) for protecting
yourself from potential hazards in the environment in which you will work.
– Each process outlined in this manual may need different PPE to protect
the service person. Use the proper PPE for the task at hand.
•
Using tools…
– All tools should be in proper working order. Do not use tools that are
broken or in disrepair.
– Use the proper tool for the proper application.
•
Using lifts, hoists, and jacks…
– All lifts, hoists, and jacks should be used in accordance with the
manufacturer information.
– Inspect lifts, hoists, and jacks prior to use.
– Do not overload lifts, hoists, and jacks.
Greensmaster ® eFlex 1021 Page 1–3 Safety: Safety Instructions
20248SL Rev C