Rail Kit Wheels (Optional)
g261683
Figure 93
1.
Wheel hex shaft
3.
Rail kit wheel
2.
Wheel clip
Removing the Rail Kit Wheel
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
2. Support the machine onto the kickstand.
3. Remove the wheel clip, and remove the rail kit wheel from the wheel hex
shaft on each side.
4. If necessary, install the transport wheels; refer to
.
Installing the Rail Kit Wheel
1. Ensure that the machine is parked on a level surface.
2. Support the machine onto the kickstand.
3. If installed, remove the transport wheels; refer to
.
4. Slide the rail kit wheel onto the wheel hex shaft and secure the wheel with
a wheel clip.
Controls, Wheels, and Accessories : Service and Repairs
Page 6–26
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
