Toro 04861, Service Manual

Page: 158 / 234

Assembling the Handle Assembly (continued)
23. Install the clutch and reel drive lever assembly; refer to Assembling the
Cutting Unit Drive Lever Assembly (page 6–11) .
24. Install the reel cable; refer to Installing the Reel Cable (page 6–8) .
25. Install the brake cable; refer to Installing the Brake Cable (page 6–5) .
26. Install the throttle cable (item 27 in Figure 84 ).
27. Adjust the traction bail proximity sensor; refer to Adjusting the Traction Bail
Proximity Sensor (page 5–20) .
28. Reposition the wire harness to the bottom control cover ( 26 in Figure 84 ).
Install the cover to the upper receiver weldment (8) with the 2 screw and
washer assemblies (25), 2 bolts (33) and 2 flange nuts (7).
29. Install the lower handle cover to the handle assembly and secure with the
4 bolts; refer to Figure 82 .
30. Install the control cover to the handle assembly and secure with the 4 bolts;
refer to Figure 82 .
31. Connect the battery pack; refer to Disconnecting and Connecting the Lithium
Battery Pack (page 5–3) .
Controls, Wheels, and Accessories : Service and Repairs Page 6–20 Greensmaster ® eFlex 1021
20248SL Rev C