Cutting Unit Drive Lever Assembly
g336962
Figure 82
1.
V-ring seal
10.
Lower handle cover
19.
Clevis connector
2.
Reel lever handle rod
11.
Reel cable
20.
Clevis pin (4 each)
3.
Knob
12.
Split bushing
21.
Extension spring
4.
Retaining ring
13.
Cotter pin clip
22.
Shoulder screw
5.
Control shaft clamp (2 each)
14.
Link assembly
23.
Reel lock lever assembly
6.
Socket head screw (4 each)
15.
Main control shaft
24.
Bail latch spacer
7.
Extension spring (2 each)
16.
Split bushing
25.
Upper receiver weldment
8.
Control cover
17.
Socket cap
26.
Flange nut
9.
Bolt and washer assembly (8 each) 18.
Cotter pin clip
27.
Reel lever assembly
Disassembling the Cutting Unit Drive Lever Assembly
Note:
Refer to
during this procedure.
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
Controls, Wheels, and Accessories : Service and Repairs
Page 6–10
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
