Servicing the Gearbox Assembly (continued)
15. If removed, lubricate the O-rings for the drain/fill plug with Mobile XHP-222 or
an equivalent grease.
g396286
Figure 126
1.
Gearbox cover
2.
Drain/fill plug
16. Install all the plugs into the gearbox cover, except for the plug for the face of
the cover (located between the 4 socket-head screws). Torque the plugs to
4 to 5 N∙m (32 to 42 in-lb)
.
17. Add
50 ml (1.7 fluid ounces)
80W-90 gear oil into the gearbox through the
hole in the face of the cover.
18. Install drain/fill plug into the hole in the face of gearbox cover, and tighten the
plug to
4 to 5 N∙m (32 to 42 in-lb)
.
19. Operate the groomer gearbox by hand to check for proper operation prior to
installation.
Universal Groomer (Optional): Service and Repairs
Page 8–12
Greensmaster
®
eFlex 1021
20248SL Rev C
Summary of Contents for 04861
