Adjustments
Adjusting the Reel Drive Belt
g312311
Figure 12
1.
Reel drive housing
4.
Carriage bolt
7.
Socket head screw (4 each)
2.
Reel drive belt
5.
Bolt Gasket
3.
Idler arm
6.
Reel drive cover
1. Ensure that the cutting-unit-drive lever is in the D
ISENGAGE
position, park the
machine on a level surface, release the clutch bail, engage the service and
parking brake, rotate the key switch to O
FF
, and remove the key; refer to
the
Operator's Manual
.
2. Disconnect the battery pack; refer to
Disconnecting and Connecting the
Lithium Battery Pack (page 5–3)
.
3. Remove the 4 socket head screws (7) that secure the reel drive cover (6)
to the reel drive housing (1), and remove the cover to expose the reel drive
belt (2).
4. Check the tension of the belt (item 2 in
) by pressing it at mid span
between pulleys with
18 to 22 N (4 to 5 lbs)
of force. If the belt deflects
6.35
mm (0.25 inch)
, belt tension is correct - continue operation. If belt tension
is not correct, proceed to next step.
Greensmaster
®
eFlex 1021
Page 4–3
Traction and Reel Drive Systems: Adjustments
20248SL Rev C
Summary of Contents for 04861
