ArcHTTP Configuration
35
When you open the SNMP traps configuration page, you will see the
following settings:
(1). SNMP Trap Configurations
Enter the SNMP trap IP address.
(2). SNMP System Configurations
Community name acts as a password to screen accesses to the
SNMP agent of a particular network device. Type the community
names of the SNMP agent in this field. Before access is granted to
a request station, this station must incorporate a valid community
name into its request; otherwise, the SNMP agent will deny access
to the system. Most network devices use “public” as default of their
community names. This value is case-sensitive.
(3). SNMP Trap Notification Configurations
Before the client side SNMP manager application accepts the
RAID storage traps, it is necessary to integrate the MIB into the
management application’s database of events and status indicator
codes. This process is known as compiling the MIB into the
application. This process is highly vendor-specific and should be
well-covered in the User’s Guide of your SNMP application. Ensure
the compilation process successfully integrates the contents of the
areca_sas.mib file into the traps database.
Please refer to
Appen-
dix C
of
“
SNMP Operation & Installation”
.
The MIBs file resides at:
<CD-ROM>\packages\SNMP_MIBs on the software CD.
