background image

INTRODUCTION

9

Unsurpassed Data Availability

Designed and leveraged with Areca’s existing high performance 

solution, the RAID storage delivers high-capacity at the best of cost 

performance value. It supports the hardware RAID 6 engine to al-

low two HDDs failures without impact the existing data and perfor-

mance. Its high data availability and protection derives from the 

many advance RAID features. ARC-8050 Thunderbolt RAID storage 

allows easy scalability from JBOD to RAID. It can be configured to 

RAID levels 0, 1, 1E, 3, 5, 6, 10, 30, 50, 60, Single Disk for JBOD. 

With innovative new ROC 6Gb/s SAS feature and support for SATA, 

SAS and SSDs, the ARC-8050 provides powerful small-workgroup 

server, power users and consumers with superior levels perfor-

mance and enterprise level data protection for external storage.

The world today, large amounts of arrays data needs by the Profes-

sional content creation application for – video editing, capturing or 

transferring video, managing 3D graphics design, producing video 

presentations and regularly data backup. ARC-8050 Thunderbolt 

RAID storage is the best solution. 

Easy RAID Management

Configuration and monitoring can be managed either through the 

LCD control panel, Archttp utility or Ethernet port. Firmware-em-

bedded web browser-based RAID manager allows local or remote 

to access it from any standard internet browser via a out-of-band 

10/100Mbits LAN port or in-band Archttp utility. ARC-8050 Thun-

derbolt RAID storage also provides API library for customer to 

combine with its own monitor utility. The intelligent cooling con-

tinuously adapts to environmental conditions by automatically 

controlling the speed of the cooling fans. This super silent design, 

optimizing balance between noise reduction and necessary cooling, 

makes ARC-8050 well suited for audio/video application especially 

the rapidly growing demand from the video editing markets.

Summary of Contents for ARC-8050

















































































































Reviews: