WEB BROWSER-BASED CONFIGURATION
44
4.5.4 Offline Raid Set
This function is for customer being able to unmount and remount
a multi-disk volume. All Hdds of the selected RAID set will be put
into offline state, spun down and fault LED in fast blinking mode.
User can remove those Hdds and insert new Hdds on those empty
slots without needing power down the controller.
4.5.5 Rename Raid Set
The default RAID set name will always appear as “Raid Set #”
when it is first created by the controller. The "Rename Raid Set"
function is for customer to rename the default RAID set name.
To rename a RAID set from a group of RAID sets:
(1). Click on the ”Rename Raid Set" link.
(2). Click the RAID set check box from the list that you wish to
rename. Click the “Submit” button. The following screen appears.
Use this option to rename the RAID set name.
4.5.6 Activate Incomplete Raid Set
If one of the disk drives is removed in power off state, the RAID
set state will change to “Incomplete State”. If the user wants to
continue to operate the controller without power-off the RAID
storage, the user can use the “Activate Incomplete Raid Set” op-
