INSTALLATION
23
Figure 2-7, Thunderbolt computer daisy chain
Step 3. Connecting Monitor Port
ARC-8050 RAID storage is normally delivered with LCD pre-
installed. You can connect LAN port to the manager clinet system,
if you want to configure and manage the RAID storage from the
clinet system through out-of-band manager.
•
LAN Port Connection
ARC-8050 RAID storage has embedded the TCP/IP & web
browser-based RAID manager in the
firmware (method 1)
. User
can remote manage the RAID enclosure without adding any
user specific software (platform independent) via standard web
browsers directly connected to the 10/100Mbit RJ45 LAN port.
Connect LAN port of the ARC-8050 using the included Ethernet
cable and then to a LAN port or LAN switch.
Step 4. Connecting RAID Storage Power
To power the RAID storage:
1. Using the included power cord, connect this power cord to a
grounded electronical outlet and to the ARC-8050 RAID storage.
2. ARC-8050 RAID storage will turn on automatically when host
computer with the power on is received by the ARC-8050. It takes
about 30 seconds to fully start up the RAID storage.
