INSTALLATION
24
3. ARC-8050 RAID storage automatically turns off when host
computer power off is detected by the ARC-8050.
When you are finished installing the ARC-8050 RAID storage, you
can set up the RAID volume using McRAID storage manager or
LCD to set up RAID volumes.
2.4.3 Volume Setup
After hardware installation, the SAS/SATA disk drives connected
to the ARC-8050 must be configured and the volume set units
initialized by the controller before they are ready to use by
the system. With MRAID software installed on your host computer
and cables connected, you are ready to turn on your ARC-8050
storage unit and use the McRAID Storage Manager to setup RAID
volumes.
Note:
1. User can press and hold the “Reset” button 3 seconds to
turn on/off the RAID storage AC power.
2. RAID storage will maintain the daisy chain with other
Thunderbolt devices even when the RAID storages have
been powered down.
Figure 2-8, Connect the power cord to a grounded electrical outlet
and to the ARC-8050 RAID storage.
