ArcHTTP Configuration
34
(2). Mail Address Configurations:
Sender Name: Enter the sender name that will be shown in the
outgoing mail.
Ex: RaidController_1.
Mail address: Enter the sender email that will be shown in the
outgoing mail, but don’t type IP to replace domain name.
Ex: [email protected].
Account: Enter the valid account if your SMTP mail server requires
authentication.
Password: Enter the valid password if your SMTP mail server
requires authentication.
(3). Event Notification Configurations:
MailTo Name: Enter the alert receiver name that will be shown in
the outgoing mail.
Mail Address: Enter the alert receiver mail address.
Ex: [email protected].
According to your requirement, set the corresponding event level:
Disable Event Notification: No event notification will be sent.
Urgent Error Notification: Send only urgent events.
Serious Error Notification: Send urgent and serious events.
Warning Error Notification: Send urgent, serious and warning
events.
Information Notification: Send all events.
Notification For No Event: Notify user if no event occurs within 24
hours.
• SNMP Traps Configuration:
To enable the RAID storage to send the SNMP traps to client SNMP
manager using the IP address assigned to the operating system,
such as Net-SNMP manager, you can simply use the SNMP function
on the ArcHttp proxy server software. To enable the RAID storage
SNMP traps sending function, click on the “SNMP Configuration”
link. The Archttp proxy only provide one direction to send the
trap to the SNMP manager without needing to install the SNMP
extension agent on the host. If SNMP manager requests to query
the SNMP information from RAID storage, please refer the Appendix
C "SNMP Operation & Installation". The “SNMP traps Configuration”
menu will show as following:
