Thunderbolt ARC-8050 User Manual Download Page 15

Page: 15 / 112

INSTALLATION

2.3.2

LCD Panel LED Indicators

There are a variety of status conditions that cause the RAID stor-

age panel monitoring LED to light. The front panel LCD comes

with three (3) status-indicating LEDs. The LEDs on the front panel

are defined, from top to bottom, Power, Busy, and Caution, as

shown in Figure 2-2.

Figure 2-2, LCD Panel LED for ARC-8050 RAID Storage

The following table provides a summary of the front panel LED.

Panel LED

Normal Status

Problem Indication

1. Power LED

(Green)

Solid green, when power on

Unlit, when power on

2. Busy LED

(Amber)

Blinking amber during host ac-

cesses RAID storage

Unlit or never flicker

3. Caution LED

(Red)

Unlit indicates that the RAID

storage and all its components

are operating correctly.

Solid indicates that one or

more component failure/Ur-

gent events have occurred.

2.3.3

Thunderbolt Port LED Indicators

Figure 2-3, Thunderbolt ports LED for ARC-8050 RAID storage

Summary of Contents for ARC-8050

















































































































Search results

Summary of Contents for ARC-8050

Reviews:

Related manuals for ARC-8050

Brands by name

Popular brands

Thunderbolt ARC-8050, User Manual

Search results

Summary of Contents for ARC-8050

Reviews:

Related manuals for ARC-8050

Brands by name

Popular brands