INSTALLATION
30
McRAID Storage Manager
Before launching the firmware-embedded web server, McRAID
storage manager through the Thunderbolt port, you first need to
install the ArcHttp proxy server on your server system. The RAID
storage can also be configured through the McRAID storage man-
ager through on-board LAN port. If you need additional information
about installation and start-up of this function, see Chapter 4 “Web
Browser-Based Configuration” on ARC-8050 user manual.
SNMP Manager Console Integration
There are two ways to transport SNMP data on the ARC-8050 RAID
storage: Out-of-Band built-in LAN interface or In-Band Thunderbolt
interface. Enter the “SNMP Tarp IP Address“ option on the firm-
ware-embedded SNMP configuration function for user to select the
SNMP data agent-side communication from the Out-of-Band built-in
LAN interface. To use In-Band Thunderbolt interface, keep blank on
the “SNMP Tarp IP Address“ option.
• Out of Band-Using Onboard LAN Port Interface
Out-of-band interface refers to transport SNMP data of ARC-8050
RAID storage from a remote station connected to the controller
through a network cable. Before launching the SNMP manager
on clinet, you first need to enable the firmware-embedded SNMP
agent function and no additional agent software inquired on
your server system. If you need additional information about
installation and start-up this function, see the section 4.8.4
"SNMP Configuration" on ARC-8050 user manual.
• In Band-Using Thunderbolt Port Interface
In-band interface refers to management of the SNMP data of
ARC-8050 RAID storage from a Thunderbolt port. In-band in-
terface is simpler than out-of-band interface for it requires-
less hardware in its configuration. To enable the RAID storage
to send the SNMP traps to client SNMP manager using the IP
address assigned to the operating system, such as Net-SNMP
manager, you can simply use the SNMP function on the ArcHttp
proxy server utility. The Archttp proxy server only provides
one direction to send the trap to the SNMP manager without
needing to install the SNMP extension agent on the host. If SNMP
manager requests to query the SNMP information from RAID
