THOMSON SpeedTouch 608, Cli Reference Manual

Page: 81 / 490

79
Config Commands
E-DOC-CTC-20040216-0002 v1.0
config load
Load complete saved (backup) or default configuration file.
Note
Use the command
config flush
before using the command
config load
.
SYNTAX:
where:
EXAMPLE:
config load [load_ip = <{no|yes}>]
[defaults = <{yes|no}>]
[flush = <{yes|no}>]
[echo = <{no|yes}>]
[filename = <string>]
load_ip Load IP settings (yes) or not (no).
Note
Not keeping the IP settings could cause lost IP connectivity in
the LAN.
OPTIONAL
defaults Load default configuration (yes) or saved configuration (no).
Note
If this parameter is not specified, the saved configuration will
be loaded.
OPTIONAL
flush Flush the current configuration before loading a new configuration (yes)
or not (no). OPTIONAL
echo Echo each command string when loaded (yes) or not (no). OPTIONAL
filename Configuration filename. OPTIONAL
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
172.16.0.5/32 0.0.0.0/0 172.16.0.5 cip1 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
172.16.0.0/24 0.0.0.0/0 172.16.0.5 cip1 1
=>config flush flush_ip=no
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
=>config load flush=yes
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
172.16.0.5/32 0.0.0.0/0 172.16.0.5 cip1 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
172.16.0.0/24 0.0.0.0/0 172.16.0.5 cip1 1
=>