THOMSON SpeedTouch 608, Cli Reference Manual

Page: 240 / 490

238
IPQoS Commands
E-DOC-CTC-20040216-0002 v1.0
ipqos queue config
Configure IP QoS subqueues.
SYNTAX:
where:
ipqos queue config dest = <string>
queue = <number{0-5}>
[propagate = <{disabled|enabled}>]
[maxpackets = <number{0-100}>]
[maxbytes = <number{0-128}>]
dest The destination interface for the IP QoS queues instantiation.
Typically, a phonebook entry. REQUIRED
queue A number between 0 and 5.
Represents the number of the queue, where:
•
5 is the Real Time queue
•
4 is WFQ4
•
3 is WFQ3
•
2 is WFQ2
•
1 is WFQ1
•
0 is the Best Effort queue.
OPTIONAL
propagate Higher priority packets will be queued in a lower priority queue, instead
of being dropped, as soon as the destination queue is in overflow state.
The packet will be put in a lower priority queue only once.
Choose between disabled or enabled.
The default is
disabled
.
Note
The propagate flag for the lowest priority subqueue
(the Best Effort queue) has no meaning.
OPTIONAL
maxpackets A number between 0 and 100.
Represents the maximum number of packets in this queue. OPTIONAL
maxbytes A number between 0 and 128.
Represents the maximum size in kilobytes of this queue. OPTIONAL