THOMSON SpeedTouch 608, Cli Reference Manual

Page: 448 / 490

446
System Commands
E-DOC-CTC-20040216-0002 v1.0
system flush
Flush current SpeedTouch™ system configuration, i.e. the System password and the system config settings (dcache
excluded).
Note
1. To avoid unrestricted and unauthorized access to the SpeedTouch™, it is highly recommended to make
sure the SpeedTouch™ is protected by a system password (via the command
system setpassword
) and to
change the password on a regular basis.
2. The flush command does not impact previously saved configurations.
SYNTAX:
EXAMPLE:
system flush
=>system flush
Security notification: Password changed, use 'saveall' to make it permanent.
=>