THOMSON SpeedTouch 608 Cli Reference Manual Download Page 186

Page: 186 / 490

184

Firewall Commands

E-DOC-CTC-20040216-0002 v1.0

prot

The protocol (name or number) expected [or NOT expected] in
the IP packet.
Choose between:

•

icmp

•

igmp

•

ipinip

•

tcp

•

udp

•

esp

•

ipcomp

or, alternatively, specify the protocol number.

OPTIONAL

syn

Expect TCP SYN flag set (yes) or not (no).
In combination with TCP ACK, this allows selection of incoming
versus outgoing TCP connections.

OPTIONAL

urg

Expect TCP URG flag set (yes) or not (no).

OPTIONAL

ack

Expect TCP ACK flag set (yes) or not (no).

OPTIONAL

srcport

The TCP/UDP port (or beginning of range) the packet should [or
should NOT] be from.
Select one of the supported TCP/UDP port names (See

“ Supported TCP/UDP Port Names” on page 480

for a listing of

TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.

OPTIONAL

srcportend

The source TCP/UDP port range end (inclusive)(Only applicable for
ranges).
Select one of the supported TCP/UDP port names (See

“ Supported TCP/UDP Port Names” on page 480

for a listing of

TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.

OPTIONAL

dstport

The TCP/UDP port (or beginning of range) the packet should [or
should NOT] be going to.
Select one of the supported TCP/UDP port names (See

“ Supported TCP/UDP Port Names” on page 480

for a listing of

TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.

OPTIONAL

dstportend

The destination TCP/UDP port range end (inclusive) (Only
applicable for ranges).
Select one of the supported TCP/UDP port names (See

“ Supported TCP/UDP Port Names” on page 480

for a listing of

TCP/UDP port names supported by the SpeedTouch™).
Alternatively, specify the protocol number.

OPTIONAL

Summary of Contents for SpeedTouch 608










































































































































































































































































































































































































































































































Search results

Summary of Contents for SpeedTouch 608

Reviews:

Related manuals for SpeedTouch 608

Brands by name

Popular brands

THOMSON SpeedTouch 608, Cli Reference Manual

Search results

Summary of Contents for SpeedTouch 608

Reviews:

Related manuals for SpeedTouch 608

Brands by name

Popular brands