THOMSON SpeedTouch 608 Cli Reference Manual Download Page 159

Page: 159 / 490

157

Eth Commands

E-DOC-CTC-20040216-0002 v1.0

eth ifconfig

Configure the Ethernet port.

SYNTAX:

where:

RELATED COMMANDS:

eth ifconfig

intf = <number {1-4}>
type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}
or number>

intf

The Ethernet interface to be configured.

REQUIRED

type

The Ethernet type.
Select either:

•

auto:
Auto negotiation of Ethernet communication speed (10Mb/s or
100Mb/s) and Duplex mode (half duplex or full duplex).

•

10BaseTHD:
10Mb/s communication speed in half duplex mode.

•

10BaseTFD:
10Mb/s communication speed in full duplex mode.

•

100BaseTHD:
100Mb/s communication speed in half duplex mode.

•

100BaseTFD:
100Mb/s communication speed in full duplex mode.

or enter a number between 0 (auto) and 5 (100BaseTFD).
The default is

auto

Note

This value should never be changed, except in case of
communication problems.

REQUIRED

eth iflist

Show Ethernet port configuration and current operating mode.

Summary of Contents for SpeedTouch 608










































































































































































































































































































































































































































































































Search results

Summary of Contents for SpeedTouch 608

Reviews:

Related manuals for SpeedTouch 608

Brands by name

Popular brands

THOMSON SpeedTouch 608, Cli Reference Manual

Search results

Summary of Contents for SpeedTouch 608

Reviews:

Related manuals for SpeedTouch 608

Brands by name

Popular brands