THOMSON SpeedTouch 608, Cli Reference Manual

Page: 452 / 490

450
System Commands
E-DOC-CTC-20040216-0002 v1.0
system settime
Show/set the SpeedTouch™ internal system clock.
When synchronization with an external NTP server via the SpeedTouch™ SNTP client fails, this command allows to
manually configure its internal clock.
Note
In cases without regular synchronization, accurate real-time clock settings can not be garantueed.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
system settime [date = <dd/mm/yyyy>]
[time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{no|yes}>]
date The system date formatted as dd/mm/yyyy.
If not specified, the current date is preserved. OPTIONAL
time The system time formatted as hh:mm:ss.
If not specified, the current time is preserved. OPTIONAL
timezone The system timezone formatted as (+ or -)hh:mm.
Valid timezones are possible from -12:00 to +14:00 with a
resolution of 15 minutes.
If not specified, the current timezone is preserved. OPTIONAL
daylightsaving Enable (yes) or disable (no) daylight saving.
The default is
yes
.
If not specified, the current daylight saving setting is preserved.
OPTIONAL
=>system settime
date = 31/01/2005
time = 18:05:16
timezone = +00:00
daylightsaving = off
=>
sntp config Show/set SpeedTouch™ SNTP client configuration.