THOMSON SpeedTouch 608, Cli Reference Manual

Page: 99 / 490

97
DHCP Commands
E-DOC-CTC-20040216-0002 v1.0
EXAMPLE INPUT/OUTPUT IN A NETWORKED ENVIRONMENT:
The SpeedTouch™ is configured as DHCP client on its Ethernet interface eth0.
RELATED COMMANDS:
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv
: 0
OFFERs recv : 0
ACKs recv : 0
NAKs recv : 0
Pure BOOTP REPLIES : 0
Other message types : 0
DISCOVERs sent : 0
REQUESTs sent : 0
DECLINEs sent : 0
RELEASEs sent : 1
INFORMs sent : 0
Number of dynamic interfaces: 1
Memory usage:
Table size of dyn leases: 18,
in use: 1, free: 94 %
=>dhcp client ifrenew intf=eth0
=>dhcp client stats
DHCP client statistics:
Corrupted packet recv
: 0
OFFERs recv : 1
ACKs recv : 1
NAKs recv : 0
Pure BOOTP REPLIES : 0
Other message types : 0
DISCOVERs sent : 1
REQUESTs sent : 1
DECLINEs sent : 0
RELEASEs sent : 1
INFORMs sent : 0
Number of dynamic interfaces: 1
Memory usage:
Table size of dyn leases: 18,
in use: 1, free: 94 %
=>(CTRL + Q)
..................
STATE IDLE !
STATE ACTIVATE !
dhcc: intf 1 renews lease 10.0.0.3.
dhcc: intf 1 requests 10.0.0.3 from 10.10.1.1
dhcc: 10.10.1.1 acks 10.0.0.3 to intf 1.
dhcc: lease 10.0.0.3 bound to intf 1.
STATE IDLE !
STATE ACTIVATE !
...........
=>(CTRL + S)
dhcp client ifadd Create a DHCP lease for a specific interface.
dhcp client ifattach Attach a DHCP lease to an interface.