THOMSON SpeedTouch 608, Cli Reference Manual, Page: 447 / 490

445
System Commands
E-DOC-CTC-20040216-0002 v1.0
system config
Show/set SpeedTouch™ system configuration parameters.
Note
For a good operation of UPnP™ and the discovery mechanism, it is highly recommended not to change the
system config settings.
SYNTAX:
where:
EXAMPLE:
system config [upnp = <{disabled|enabled}>]
[mdap = <{disabled|enabled}>]
[drst = <{disabled|enabled}>]
[digestauth = <{disabled|enabled}>]
[strictusername = <{disabled|enabled}>]
upnp Enable or disable UPnP™ discovery. The default is
enabled
. OPTIONAL
mdap Enable or disable proprietary discovery protocol.
The default is
enabled
.
OPTIONAL
drst Enable or disable DrSpeedTouch access. The default is
enabled
. OPTIONAL
led Set the SpeedTouch™ system LED color. Choose between:
•
green: solid green
•
red: solid red
•
orange: solid orange
•
flash: toggle between green and orange
•
off: LED is off.
The default is
green
.
OPTIONAL
digestauth Enable or disable HTTP digest authentication. The default is
disabled
. OPTIONAL
strictusername Enable or disable strict username check. The default is
disabled
. OPTIONAL
dcache Enable or disable data cache. The default is
enabled
.
Note
For internal use only. Do NOT alter in any way.
OPTIONAL
=>system config
upnp discovery
: enabled
mdap discovery : enabled
drst support : enabled
digest authentication : disabled
strict username
: disabled
dcache : enabled
led : green
=>