THOMSON SpeedTouch 608, Cli Reference Manual

Page: 24 / 490

22
CLI Navigation
E-DOC-CTC-20040216-0002 v1.0
Basic Navigation and Manipulation
Manipulation commands are commands that manipulate operations on the command line, for example changing the
command group, go to the beginning of the command line, go to the end of the command line, etc.
Command group navigation
From top level, you can change to a command group by executing the name of the desired command group.
To obtain a list of all available command groups, execute
help
from the top level.
The example below shows every possible CLI command group for the SpeedTouch™608 ADSL/POTS variant:
The following command groups are specific for certain variants:
•
atmf
is only applicable for models equipped with an ATMF-25.6Mb/s port
To return to top level, or to go up one level (in case of nested command groups), enter .. at the prompt.
Example:
=>help
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
Following command groups are available :
adsl atm autopvc bridge cip
config dhcp dns env eth
ethoa firewall ip ipoa ipqos
ipsec label language nat phonebook
pppoa pppoe pptp qosbook script
snmp sntp software system systemlog
td upnp
=>
=>phonebook
[phonebook]=>
[phonebook]=>..
=>