THOMSON SpeedTouch 608, Cli Reference Manual

Page: 58 / 490

56
Bridge Commands
E-DOC-CTC-20040216-0002 v1.0
bridge ifconfig
Configure a bridge interface.
SYNTAX:
where:
bridge ifconfig intf = <intfname>
[dest = <string>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[fcs = <{off|on}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number {0-65535}>]
intf The name of the bridge interface to configure. REQUIRED
dest The destination for this interface. Typically a phonebook entry.
This parameter only needs to be specified when an interface has
been created without specified destination. OPTIONAL
qos The name of the Quality Of Service (QoS) book entry to apply on
this bridge interface. OPTIONAL
encaps The type of encapsulation to be used for this bridge interface.
Choose between:
•
llc/snap
•
vcmux.
OPTIONAL
fcs Whether or not to include the Ethernet FCS in the packet header on
the WAN side. Choose between:
•
off
•
on.
The default is
off
.
Note
FCS is normally left off.
OPTIONAL
portstate The bridge portstate for this interface.
Choose between:
•
disabled
•
learning
•
forwarding.
OPTIONAL
retry A number between 0 and 65535.
Represents the number of times the SpeedTouch™ retries to set up
a WAN connection before giving up.
The default is
10
.
OPTIONAL