THOMSON SpeedTouch 608, Cli Reference Manual

Page: 33 / 490

31
CLI Navigation
E-DOC-CTC-20040216-0002 v1.0
Service Template Files and the CLI
Service Template Files
The Service Template files, used by the Setup wizard, or directly uploaded via the SpeedTouch™ web pages, consist of
a set of CLI commands. Only CLI commands, which are part of the SpeedTouch™ CLI command set, may be used in
the .ini and .def files.
For readability, Service Template files are partitioned in paragraphs. These paragraphs reflect a CLI command group
selection in the SpeedTouch™ CLI. However, due to internal processing, not all paragraph names are the same as their
corresponding CLI command group selection.
The table below shows the relationship between the [<configuration>.ini] paragraphs and the available
SpeedTouch™ CLI commands:
[<configuration>.ini] paragraphs Available SpeedTouch™ CLI commands
[adslisdn.ini] The adsl CLI command group (only for a ADSL/ISDN variant)
[adslpots.ini] The adsl CLI command group(only for a ADSL/POTS variant)
[autoip.ini] The ip auto CLI command subgroup
[autopvc.ini] The autopvc CLI command subgroup
[bridge.ini] The bridge CLI command group
[cip.ini] The cip CLI command group
[dhcc.ini] The dhcp client CLI command subgroup
[dhcp.ini] The dhcp server CLI command subgroup
[dhcr.ini] The dhcp relay CLI command subgroup
[diagnostics.ini] The ip ping CLI command
[dnsc.ini] and [dnsd.ini] The dns CLI command group
[env.ini] The env CLI command group
[eth.ini] The eth CLI command group
[ethoa.ini] The ethoa CLI command group
[ip.ini] The ip CLI command group
[ipoa.ini] The cip CLI command group
[ipqos.ini] The ipqos CLI command group
[ipsec.ini] The ipsec, ipsec cert, ipsec connections, ipsec descriptor, and ipsec peer
CLI command subgroups.
[label.ini] The label CLI command group
[language.ini] The language CLI command group
[nat.ini] The nat CLI command group
[oam.ini] The atm oam CLI command subgroup