THOMSON SpeedTouch 608, Cli Reference Manual

Page: 212 / 490

210
IP Commands
E-DOC-CTC-20040216-0002 v1.0
ip ping
Send ICMP ECHO_REQUEST packets.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ip ping addr = <ip-address>
[count = <number{1-1000000}>]
[size = <number{1-20000}>]
[interval = <number{100-1000000}>]
[listen = <{off|on}>]
addr The destination IP address. REQUIRED
count A number between 1 and 1000000.
Represents the number of pings to send. OPTIONAL
size A number between 1 and 20000 (bytes).
Represents the size of the ping packet(s). OPTIONAL
interval A number between 100 and 10000000 (milliseconds).
Represents the intermediate interval between two sent ICMP packets. OPTIONAL
listen Listen for incoming ICMP packets (on) or only send ICMP packets (off). OPTIONAL
=>ip ping addr=10.0.0.148 listen=off
=>ip ping addr=10.0.0.148 listen=on
9 bytes from 10.0.0.148: Echo Request
=>ip ping addr=10.0.0.148 count=15 listen=on
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
9 bytes from 10.0.0.148: Echo Request
=>
ip sendto Send UDP packets.