THOMSON SpeedTouch 608, Cli Reference Manual

Page: 27 / 490

25
CLI Navigation
E-DOC-CTC-20040216-0002 v1.0
Command Line Navigation
•
Press CTRL+A to go to the beginning of the command line.
•
Press CTRL+L to go to the end of the command line.
Breaking off Commands
You can break off a command by pressing CTRL+G. This can be useful in a situation where a user is prompted to enter
a value which he does not know and wants to quit the command. Instead of being prompted over and over again for the
same value, this allows to quit the command and return to the command line prompt.
In the example below, CTRL+G is pressed after the third prompt
chain =
History of Commands
Use the UP and DOWN ARROW keys to select a previously executed command. Press ENTER to execute the selected
command.
Example:
[firewall]=>match
chain =
chain =
chain = “CTRL+G”
[firewall]=>
=>firewall
[firewall]=>list
assign
hook=input chain=input
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source
[firewall]=> “UP ARROW”
[firewall]=>:firewall list