THOMSON SpeedTouch 608, Cli Reference Manual

Page: 69 / 490

67
CIP Commands
E-DOC-CTC-20040216-0002 v1.0
cip ifadd
Create a Classical IP oA interface at the local side of the Logical IP Subnet (LIS).
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
cip ifadd addr = <ip-address>
[netmask = <ip-mask (dotted or cidr)>]
[uniaddr = <portspec:address[.selector]>]
addr The Classical IP oA interface's local IP address in the LIS. REQUIRED
netmask The LIS's subnetmask. OPTIONAL
uniaddr The UNI-address/port specification for incoming connections, e.g.
‘A0:*.03‘: ADSL port, any address, selector 3.
Note
This parameter is only applicable in an Switched Virtual
Channel (SVC) environment.
In most cases, the Classical IP oA LIS is built in a
Permanent Virtual Channel (PVC) environment.
OPTIONAL
=>cip iflist
cip1
addr = 172.16.0.5 mask = 255.255.255.0
UNI address = A0:*.04
inarp_reqs_in
= 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out = 0
=>cip ifadd addr=172.16.1.1 netmask=255.255.255.0
=>cip iflist
cip1
addr = 172.16.0.5 mask = 255.255.255.0
UNI address = A0:*.04
inarp_reqs_in
= 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out = 0
cip0 addr = 172.16.1.1 mask = 255.255.255.0
UNI address = A0:*.03
inarp_reqs_in
= 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out = 0
=>
cip ifdelete Delete a Classical IP oA interface.
cip iflist Show current Classical IP oA configuration.