7.
Select
Run ID
, and/or
Notes
, then enter the applicable information.
The default
Run ID
is YYYYMMDDHHMM, where “YYYYMMDD” is the date and “HHMM” is the
current time.
8.
If you are making runs on:
•
Only this instrument –
Select
Start Run Now
, then
OK
. The cover is heated to the required
temperature, then the run begins. When the run is complete, the
Run Report
is displayed.
or
•
Multiple instruments –
Select
Start Multiple Runs
. The
Select Instruments
screen is
displayed:
9.
In the
Select Instruments
screen:
a.
Select the check box corresponding to each instrument on which you want to perform the
run. Only instruments that are compatible with the run method are available. Incompatible
instruments are indicated by .
If you want to perform the run on this instrument, be sure to select the check box in the upper
left corner of the screen.
b.
Select
Start Run Now
, then
OK
. The run method is sent to each selected instrument, and, if
no problems are encountered, the run begins.
After the run begins, you must interact with any remote instruments directly if you want to
make changes to the run method, pause, or stop the run. When the runs are complete, the
Run Reports
are displayed on each instrument.
Chapter 3
Performing a run
Performing a run
3
58
Veriti
™
Thermal Cycler User Guide